###
食品研究与开发:2020,41(3):53-58
查看/发表评论     过刊浏览    高级检索     HTML     PDF
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
腰果叶多酚超声波辅助提取工艺及其抗氧化能力测定
(1.江门职业技术学院,广东江门529090;2.广东省绿色高性能新材料研发工程技术研究中心,广东江门529090;3.中国热带农业科学院热带作物品种资源研究所,海南儋州571737;4.广东省农科院植物保护研究所,广东广州510640)
Ultrasonic Assisted Extraction Cashew Leaves Polyphenol Process and Determination of Antioxidant Capacity
(1.Jiangmen Polytechnic,Jiangmen 529090,Guangdong,China;2.Guangdong Provincial Green and High Performance Novel Materials Engineering Research Center,Jiangmen 529090,Guangdong,China;3.Tropical Crops Genetic Resources Institute,Chinese Academy of Tropical Agricultural Sciences,Danzhou,571737,Hainan,China;4.Plant Protection Research Institute,Guangdong Academy of Agricultural Sciences,Guangzhou 510640,Guangdong,China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1749次   下载 336
投稿时间:2019-02-26    
中文摘要: 以腰果叶为原料,采用超声波辅助手段对腰果叶多酚进行提取。在单因素试验基础上,通过响应面法优化腰果叶多酚提取工艺条件。1.0 g 腰果叶粉末,所得到最优提取工艺条件为:丙酮体积分数60%、提取温度60 ℃、提取时间90 min,实测得率为10.29%,接近预测值10.33%。通过腰果叶多酚提取物对DPPH 自由基清除能力,ABTS+自由基清除能力,铁离子还原能力,得出腰果叶多酚提取物具有抗氧化能力,相同浓度下腰果叶多酚提取物抗氧化性高于天然抗氧化剂VC。
中文关键词: 腰果叶  多酚  超声波提取  抗氧化力  响应面
Abstract:Taking the cashew leaves as the research object,the polyphenol was extracted by ultrasonic assisted means.Based on the single factor experiment,the process conditions of polyphenol extraction from cashew leaves were optimized by response surface methodology.The optimal extraction conditions were as follows:the concentration of acetone solution 60 %,extraction temperature 60 ℃and ultrasonic time 90 min when cashew leaves were 1.0 g.The measured yield was 10.29%,close to the predicted value of 10.33%.Through the DPPH free radical scavenging ability,ABTS+radical scavenging ability and iron ion reducing power of the polyphenol extract of cashew leaves,it was concluded that the polyphenol extract of cashew leaves had antioxidant capacity.The antioxidant activity of cashew polyphenol extract was higher than natural antioxidant VC at the same concentration.
文章编号:202003010     中图分类号:    文献标志码:
基金项目:农业部国际交流与合作项目(1630032018011、1630032017010);广东省绿色高性能新材料研发工程技术研究中心资助课题(江科[2019]131);江门市高性功能材料与涂料重点实验室(江科[2018]352 号);江门市基础与理论科学研究类科技计划项目(江科[2019]185 号)
引用文本:


用微信扫一扫

用微信扫一扫