###
食品研究与开发:2017,38(14):169-173
本文二维码信息
码上扫一扫!
鲁氏酵母发酵剂喷雾干燥参数优化及动力学研究
周亚男,杨宏志*,李志江*,赵婧,魏春红,关琛
(黑龙江八一农垦大学 食品学院,黑龙江 大庆 163319)
Parameters Optimization and Kinetics Study of Zygosaccharomyces rouxii with the Spray Drying Method
ZHOU Ya-na,YANG Hong-zhi*, LI Zhi-jiang*, ZHAO Jing, WEI Chun-hong, GUAN Chen
(College of Food, Heilongjiang Bayi Agricultural University, Daqing 163319, Heilongjiang, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 5490次   下载 3531
投稿时间:2017-04-21    
中文摘要: 为制备鲁氏酵母发酵剂,研究喷雾干燥工艺对鲁氏酵母发酵剂活菌存活率的影响。通过单因素及正交试验, 确定最佳喷雾干燥工艺参数;以最重要因素进口温度为基础,研究喷雾干燥过程的动力学特性,应用 SigmaPlot 软件 构建理论与经验结合的喷雾干燥动力学模型。结果显示,鲁氏酵母喷雾干燥工艺最优参数为进口温度 120 ℃、进料流 量 17 %(蠕动泵转速占比)、保护剂与菌泥比例 1 ∶ 1(g/L)。在喷雾干燥过程中,活菌存活率符合 Polynomial 模型函数, 在温度范围内,存活率变化符合二次线性函数模型。
中文关键词: 鲁氏酵母  喷雾干燥  参数  动力学模型
Abstract:In order to prepare the Zygosaccharomyces rouxii, the effect of spray drying on the survival rate of live yeast fermentation was studied. With the single factor and orthogonal test, the optimal parameters of the spray drying were constructed. Based on the most important factor of inlet temperature, the kinetic characteris- tics of the spray drying process were studied by the SigmaPlot software to construct the spray drying dynamics model together with theory and experience. The results indicated that the optimal spray drying parameter of the inlet temperature was 120 ℃, feed flow was 17 %, ratio of preservative to bacteria was 1 ∶ 1 (g/L). During the spray drying process, the survivability of live bacteria was in accordance with the Polynomial model function, which the survival rate changed in line with the quadratic linear function model within the temperature range.
文章编号:201714036     中图分类号:    文献标志码:A
基金项目:大庆市指导性科技计划项目“鲁氏酵母高密度培养制备技术及其豆酱增香效果研究”(ZD-2016-154);大庆市指导性科技计划项目“鲁氏酵母对面团发酵特性及焙烤食品品质影响研究”(ZD-2016-030);大庆市指导性科技计划项目“豆酱中大豆苷元和染料木黄酮提取纯化及生物活性研究”(SZDFY-2015-33);黑龙江八一农垦大学博士启动基金项目(XDB 2015-08);黑龙江八一农垦大学研究 生创新科研项目(YJSCX2017-Y53)
引用文本:


用微信扫一扫

用微信扫一扫