###
食品研究与开发:2017,38(19):81-84
本文二维码信息
码上扫一扫!
即食海带粉成型工艺条件的优化研究
石岩1,陈芳甜2
(1.日照市农产品质量安全检验检测中心,山东日照276800;2.日照职业技术学院,山东日照276800)
Study on Optimization of Instant Kelp Powder Molding Process Conditions
SHI Yan1,CHEN Fang-tian2
(1.Rizhao Ispection and Testing Center for Agricultural Products and Quality,Rizhao 276800,Shandong,China;2.Rizhao Polytechnic,Rizhao 276800,Shandong,China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1240次   下载 747
投稿时间:2017-02-04    
中文摘要: 选用具有较高营养价值的大型海生褐藻植物海带为原料,经酶解、固化、护色、熟化等一系列工艺制成即食海带粉。本文主要探讨在海带经酶解后的氯化钙体系固化过程。分别探讨不同浓度、不同时间和不同温度下的氯化钙对海带粉成型的影响。试验结果表明:在温度25℃、2%的氯化钙溶液中固化60 s,清水洗净后再在温度25℃、0.2%的氯化钙溶液中进一步固化20 min,所形成的凝胶效果最佳,其拉伸强度和弹性达到最大值。
中文关键词: 海带  氯化钙  凝胶特性  拉伸强度  弹性
Abstract:The kelp which is a kind of large marine brown algal plant with more nutritious was chosen as experimental raw materials to product instant kelp powder.The experiment procedure included a series of crafts,such as enzymatic hydrolysis,curing,nursing of color and ripening etc.The author mainly discussed the curing process of calcium chloride system while the kelp was enzymatically hydrolyzed.The effects on the formation of kelp powder were influenced by different concentration,different time and different temperature.It showed by experimental results that when the kelp was solidified for 60 s in the 2%calcium chloride solution of 25℃,then cleaned it up,put it into the 0.2%calcium chloride solution of 25℃ to solidify for 20 min,the resulting gel was the best,which could reach maximum of tensile strength and elasticity.
文章编号:201719018     中图分类号:    文献标志码:A
基金项目:
引用文本:


用微信扫一扫

用微信扫一扫